Be Our Fan!
Fluke Indonesia SUB WEB
Distributor Fluke Indonesia - www.tridinamika.co.id | Dapatkan penawaran harga yang bersaing dari kami. Silahkan isi Form Inquery sekarang juga..

Selasa, 27 November 2012

Fluke 2AC VoltAlert Voltage Detector

Fluke 2AC VoltAlert Voltage Detector


Fluke 2AC
Fluke 2AC

Description

Always on for faster, safer voltage testing

Fluke 2AC is the latest addition to the VoltAlert™ ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.

Specifications
Operating Principles
Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.
Safety Compliance:
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
EMC Compliance:
Meets IEC 61326-1:2006
Operating:
200 V ac to 1000 V ac, CAT IV 1000 V rated
Temperature:
Operating: -10 °C to 50 °C (-14 °F to 122 °F)
Storage: -10 °C to 50 °C (-14 °F to 122 °F)
Humidity:
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 to 55 °C)
Altitude:
2000 m (CAT IV 1000 V)
Cleaning:
Clean with damp cloth
Battery Life:
Typical battery life of greater than one year
Warranty Period:
Two years





Distributed By : PT.Tridinamika Jaya Instrument, Distributor FLUKE Indonesia

Jumat, 23 November 2012

Fluke 1AC-II VoltAlert

The pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Specifications
Operating principle
Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style
Blade or round, depending on model
Light source
One high intensity red LED
Agency Approvals
c CSA us, CE, C-Tick
Safety Rating
1000 V, CAT IV
IP Rating
IP 40
Operating Temperature
-10 °C to 50 °C



Distributed By : PT.Tridinamika Jaya Instrument, Distributor FLUKE Indonesia

Twitter Delicious Facebook Digg Stumbleupon Favorites More